Troubleshooting / Electric kick scooters

How to Reset an Electric Scooter

Restart, factory reset, or reset button? They are three different things. Find the right procedure for your model before you press anything.

Technical studio illustration of an electric kick scooter with a power button and companion app, explaining the different kinds of reset
Power, app and breaker resets solve different problems. Always identify your exact model.
The short answer

For a normal restart, park safely, disconnect the charger, turn the scooter off using the instructions for your model, wait about 30 seconds, and turn it back on. This does not erase settings. A factory reset, app/account reset, and a physical circuit-breaker reset require different model-specific instructions. There is no universal “power + brake + throttle” combination.

First, which kind of reset do you need?

01
Power restart

Turns the scooter off and back on. Usually keeps settings, Bluetooth ownership and stored data.

02
Factory / app reset

May erase settings or affect pairing. Use only the procedure published for your exact model.

03
Breaker reset

Restores a tripped electrical circuit on some models. Not the same as restoring firmware settings.

Stop before doing anything electrical. If a scooter or charger is swollen, smoking, unusually hot, wet internally, leaking, or giving off a burning odor, stop use and charging. Don't open the deck, poke an unidentified hole, bypass a battery-management system, or keep rearming a breaker that trips repeatedly.
Quick model guide

Find the next safe step

Choose a manufacturer and what you're trying to solve. This guide deliberately won't invent an undocumented button sequence.

Start with a safe restart

Use your model's normal power-off instructions, disconnect the charger, wait about 30 seconds and restart. If the problem remains, choose the exact symptom above.

How to safely restart an electric scooter

  1. Park it and stop riding. Choose a stable, dry place away from traffic. Don't test the throttle while following these steps.
  2. Disconnect the charger. If the scooter is hot, wet, visibly damaged or behaving abnormally, stop and seek qualified help instead.
  3. Use the normal power-off control. Different models require different press durations. For example, GOTRAX documents a 5-second power-button hold to turn off certain GXL V2-family scooters.
  4. Wait roughly 30 seconds. This is a simple pause to allow a normal power cycle, not a manufacturer-certified battery or controller reset.
  5. Turn it back on normally. Look for a warning code, padlock symbol or Bluetooth indicator. If the same fault returns, record the exact model and code instead of repeating random combinations.

A restart can resolve a temporary screen or app glitch, but it cannot repair a faulty controller, damaged battery, jammed brake or severed cable. If the display stays dark, use our electric scooter won't-turn-on troubleshooting guide.

How to reset an electric scooter by brand

These are specific manufacturer-documented operations, not a claim that every scooter from the same brand uses identical controls. Verify the model label, year and manual before taking an irreversible action.

Xiaomi

Verified factory reset

For Xiaomi Electric Scooter 4 Ultra, 5, 5 Pro, 5 Plus, 6 Essential and 6 Lite: Xiaomi's support instructions describe turning the scooter on, squeezing the brake fully, then holding the accelerator and power button together for 7 seconds. On supported models, a beep confirms the reset. Some models also offer a restore-settings action in the Xiaomi Home app.

Important: This can delete stored data and require rebinding. Do not apply it blindly to a different Xiaomi model or use it just because your scooter won't start.

Manufacturer references: Electric Scooter 5, 5 Plus and 6 Essential.

Hiboy

App password reset — not factory

Hiboy's official troubleshooting FAQ says S2, S2 Pro and S2R models using the Hiboy S2 app can reset the app password by pressing the electronic brake and power button together for 5 seconds, returning the password to the documented default. This is specifically a password procedure, not proof that the scooter firmware was factory-reset.

Other Hiboy models use different apps and credentials. If yours displays an error code, check that model's fault information first.

Hiboy official FAQ.

Segway-Ninebot

Find My reset is different

The F3-series manual describes a reset sequence involving five brake squeezes and a power-button press, but it appears in the section about removing Apple Find My pairing. It's not a documented universal factory reset for the scooter's electronics. If your issue is ownership or location tracking, use your Segway Mobility app and the manual for your exact model.

For a frozen dashboard or error code, power-cycle normally. Don't copy an F3 pairing command onto a MAX, F2 or another Ninebot just because the brand name matches.

Segway F3-series owner manual (Apple Find My section) · Official model support.

Razor E-series

Physical breaker on supported models

Razor E100, E200 and E300-series service materials include a reset button / circuit breaker. The E200 and E300 parts diagrams locate the reset component in the scooter's battery-tray electrical assembly. Some versions expose a small reset button near the deck power controls; consult the specific diagram instead of opening the deck to search for it.

Turn the scooter off first. If your manual directs you to press an accessible breaker reset, follow it once after addressing the overload. A breaker that repeatedly trips needs diagnosis rather than repeated resets.

Razor E-series support, manuals and reset-button guidance.

GOTRAX

Power cycle, not universal factory reset

GOTRAX documents different power and display controls across its range. On GXL V2 / XR Ultra / XR Elite / Apex families, the official basic-controls article describes holding the red button to switch the scooter off; for G4 and GMAX, use the model's long-press power control.

We did not find a manufacturer-published, universal GOTRAX factory-reset button sequence. If a fault code returns after restarting, use the exact code list or model manual rather than trying guessed brake-and-throttle combinations.

GOTRAX basic controls · Official code reference.

NIU KQi

Owner account / pairing

If you're changing phones or trying to pair a secondhand KQi scooter, start with the NIU app's device-binding steps. NIU says a scooter can be associated with one owner account at a time, and recommends contacting its support team with the scooter's serial number and proof of purchase when previous binding prevents access.

That is different from resetting the scooter battery or controller. A generic online “NIU factory-reset combo” is not a substitute for NIU's documented binding and ownership process.

NIU official KQi pairing guide.

Where is the reset button on an electric scooter?

There isn't one universal location. Some electric kick scooters have no separate accessible reset button at all; the only control is a normal power button. Razor E-series models may have a circuit breaker. Smart scooters may place a settings reset in the manufacturer's app. A hole near the charging port is not automatically a reset hole.

Usually safe to identify

Power switch; labeled breaker described in the manual; official app reset option; displayed fault code or lock symbol.

Don't improvise

Unlabeled pinholes; opening a lithium-ion battery; unplugging internal controller wiring; bridging contacts; bypassing account locks.

What about mobility scooters?

Seated mobility scooters may have a main circuit breaker with an accessible push-to-reset button. Those instructions are a different category from stand-up electric kick scooters and must follow the mobility scooter maker's manual.

What if your scooter still won't work?

A reset that fails—or a fault code that immediately returns—suggests the next step is diagnosis, not more button combinations.

  • Completely blank display: check the model's normal power instructions and follow our no-power checks.
  • Charging light but no range: read our charging diagnostic guide; never try to bypass battery protection.
  • Dashboard on, throttle does nothing: check for lock mode, kick-start rules and displayed errors in our motor-not-working guide.
  • Repeating shutdowns, hot electrical components or breaker trips: stop using it until a qualified repair shop evaluates the cause.
  • App says it belongs to another account: use the original owner's unbinding process or proof-of-ownership support channel; a hardware restart won't legitimately remove account ownership.

What to have ready when contacting support

Exact make and model, model year if known, serial number (share only with the manufacturer or trusted technician), a photo of the dashboard code, charging behavior, and what happened immediately before the fault. These details are more useful than telling a repair shop only that a reset “didn't work.”

Electric scooter reset FAQs

Does every electric scooter have a reset button?

No. Some have a normal power control and app-managed settings, while certain older or kid-oriented models use a circuit breaker. Check the exact model manual.

Will a factory reset fix a dead battery?

No. Resetting software settings will not repair defective cells, corrosion, physical damage or a failed battery-management system. Never open a battery pack to attempt a reset.

Does restarting erase my mileage or settings?

A normal off/on power cycle generally leaves settings intact. Factory resets can erase locally stored settings or affect pairing; check the manufacturer's description before proceeding.

Can I reset a scooter that is locked to someone else's account?

Use the previous owner's unlinking process or official support with proof of purchase. A restart is not an ownership transfer and should not be treated as a bypass.

What does a blinking light or beep mean after reset?

It depends on the brand and model. Record the exact blink pattern, displayed error code and when it appears. Don't assume a generic code chart applies across manufacturers.

Should I reset my scooter before selling it?

Follow the maker's transfer and unbinding instructions, remove the scooter from your own app account when permitted, and disclose any unresolved mechanical or electrical faults. A full factory wipe is not necessarily the same as owner unbinding.

Manufacturer sources and limitations

Model-specific procedures above were checked against manufacturers' published support materials. A procedure may change between generations, revisions and firmware releases. Follow your exact manual when it differs. Check the current owner manual for your exact product revision before changing settings.

Still stuck? Find a local scooter repair shop.

Compare repair services in The Scooterist directory. Tell the shop the exact model and symptoms so they can confirm they work on that scooter.

Browse electric scooter repair shops